Are you in the market for a pocket hole jig? If so you are probably facing many of the same issues that buyers that came before you encountered. There are lots of different products on the market but only a select few of them are worth your time and money.
You could try and figure things out for yourself, gambling on a dicey tool and hoping it works, or you could do the smart thing and take the advice of someone that knows the market. Hey, that’s me.
I’ve spent months personally viewing a wide range of different hole jigs. In this list, we highlight the top ten products on the market. Read on for some best pocket hole jig reviews!
Table of Contents
- Best Pocket Hole Jigs – Comparison
- Best Pocket Hole Jig Reviews - (Updated List)
- 1. Kreg K5 Pocket-Hole Jig
- 2. Kreg Jig R3 Pocket Hole System
- 3. Wolfcraft 4643404 Pocket Hole Woodjoining Jig Kit
- 4. R3-Promo Kreg R3 Jig Pocket Hole Kit
- 5. Kreg Jig K4 Pocket Hole System
- 6. General Tools 850 Heavy Duty, Aluminum Pocket Hole Jig Kit
- 7. Milescraft 13230003 PocketJig200 Kit
- 8. Milescraft 1321 PocketJig100 Kit
- 9. Massca Twin Pocket Hole Jig Set
- 10. Drill Master Portable Pocket Hole Jig Kit
- Buyer’s Guide
Best Pocket Hole Jigs – Comparison
Aluminum + plastic
1/2" - 1.1/2
Best Pocket Hole Jig Reviews - (Updated List)
1. Kreg K5 Pocket-Hole Jig
It’s just really well built. The dust protection port is especially handy at prolonging the life of the tool and enhancing its performance.
Not so Good
Jigs, in general, tend to be very affordable but this one little pricey.
The Kreg K5 Pocket-Hole Jig is about as effective as a jig can get. It is made to be extremely durable and even features a handy dust port to prolong the life expectancy of the tool.
The dust port essentially ensures that you won’t get gunk in the important components of your jig. It is an invaluable feature on any tool really.
The unit also features convenient mounting clamps and the inclusion of all necessary accessories. Unfortunately, you do need to be willing to pay a decent amount of money to get your hands on this bad boy.
2. Kreg Jig R3 Pocket Hole System
I liked the broad utility of this product. It is essentially a smaller, much more affordable version of our top choice.
Not so Good
Unfortunately, the build quality just isn’t quite there. It is fairly fragile which may be problematic in the long run.
The Kreg Jig R3 is an affordable product that comes from a company that is well established in the world of jigs. It’s actually quite like the top choice on our list. In addition to coming from the same company, it also just benefits from a similarly handy design concept.
This unit is extremely compact, it features a wide range of accessories and it can be used for many different hole sizes.
Unfortunately, though there are ways in which the jig falls flat. Most notably there are some distinct durability problems. If you want something that will last indefinitely, this may not be it. However, if you’d like a tool that can be relied upon for occasional use, then, by all means, consider this unit a worthy candidate.
3. Wolfcraft 4643404 Pocket Hole Woodjoining Jig Kit
I was partial to the one-piece design concept. The fewer moving parts that a tool has, the less room there is for something to go wrong.
Not so Good
Unfortunately, durability simply is not there. This unit will break fairly easily if put under serious stress.
The Wolfcraft is a good wood joining jig for moderate use. It features an affordable price tag and a one-piece design concept that eliminates unnecessary moving parts. All accessories are included with the purchase price and the build is compact enough to easily fit into your pocket.
The jig can be effortlessly operated in several simple and straightforward steps making it a good option for the basic user with only a limited range of needs.
That said, the durability factor is quite problematic. The unit is very fragile and will break under duress. If you have modest needs it may not be a problem. However, users that are regularly in need of a jig will probably run into problems.
4. R3-Promo Kreg R3 Jig Pocket Hole Kit
It’s another affordable and fairly easy to use jig for buyers on a budget.
Not so Good
The parts are a little bit fragile. It’s a decent piece of equipment but high volume users will want to look elsewhere.
The R3-Promo is a comprehensive package that includes just about everything you could need to get started in the world of pocket hole jigs. It is compatible with a wide range of different sizes and measurements and it even comes with a free clamp that enhances its user-friendliness.
If you want an easy to adjust piece of equipment this is going to get the job done. However, it does suffer the way that most affordable jigs unfortunately do: it is very fragile. It will certainly be suitable for the needs of the average buyer, but people that tend to utilize their jigs often will want to opt for a sturdier product.
5. Kreg Jig K4 Pocket Hole System
A sturdy, reliable piece of equipment that will be optimal for the high-volume user.
Not so Good
It is one of the most expensive jigs on our list.
The Kreg Jig K4 is a high-end unit that is extremely sturdy. If you want something that will be able to work for a long time even throughout the course of high-volume use this will be the jig that you reach for.
It includes all accessories that are needed for optimal performance and the build quality is such that durability will never be your main concern.
It is a great piece of equipment for high-volume work but it does come with the sort of price tag that often accompanies products of this quality level.
6. General Tools 850 Heavy Duty, Aluminum Pocket Hole Jig Kit
I think the biggest selling point here is the price. This is about as low a rate as you’ll ever find on a pocket hole jig.
Not so Good
The aluminum may keep the tool lightweight but it doesn’t do much in terms of fortification. This unit is very flimsy.
The General Tools 850 is an all-inclusive package that features a free carrying case, and all accessories needed for full utilization of the tool. However, the biggest selling point will definitely be the price tag. This is among the most affordable products on our list making it a good opportunity for the buyer with a restrictive budget.
It is also worth mentioning that this may be the easiest unit to transport on our entire list. The aluminum build makes it virtually weightless.
Unfortunately, the aluminum also serves as a bit of a con. The material is not very durable at all, and will quickly chip and degrade over time. For light use, it is just fine but it will not last very long in the hands of a pro.
7. Milescraft 13230003 PocketJig200 Kit
This comprehensive package will be great for the beginner.
Not so Good
The plastic fencing is basically garbage.
The Milescraft has been made with the beginner in mind. The accessory package is robust and comes with everything that you need to get started. The unit is also very easy to use and can be effortlessly adjusted to suit a range of different sizes and depths.
To that end, the tool is also very versatile. If you are just getting started in the world of pocket hole jigs, this affordable package will serve as an enticing starter kit.
Unfortunately, it does have a distinctly “starter kit” feel to it. The biggest problem is definitely the fence. The plastic is extremely fragile and just won’t hold up for very long, even with moderate use. For the money you pay, you’re getting a lot but the user nevertheless is well advised to moderate their expectations.
8. Milescraft 1321 PocketJig100 Kit
Pretty much the only selling point here is the price. It’s super cheap, in every sense of the word.
Not so Good
This is about as basic as a pocket hole jig can get. The product does suffer in its simplicity. You won’t be able to get much done with this.
The Milecraft 1321 is about as simple of a jig as you are ever likely to find. This affordable unit is available at under $$, and the affordability factor weighs heavily on the performance.
It’s certainly not all bad. You do get a couple of handy accessories that will enhance the overall performance of the tool. It even benefits from an easy to use interface that will help beginner get started.
Unfortunately there just wasn’t much attention paid to detail. The build quality is extremely low and the hardware used in the construction of the jig is similarly shoddy. It is difficult to enjoy long term high-quality results with this piece of equipment. That doesn’t mean you can’t get a couple of good uses out of it, but it does mean you should look elsewhere for a long term pocket hole jig solution.
9. Massca Twin Pocket Hole Jig Set
This is an affordable way to get some high-end features, including magnetized clamps that make it easier to deliver precision work.
Not so Good
This unit doesn’t produce very clean results. I found that the holes created with this jig were ragged and unsightly. Pros will want to look elsewhere.
The Massca is an affordable jig made specifically with the amateur user in mind. It features an affordable price tag and several features that often tend to be fairly expensive. For example, you get magnetic clamps on this unit, a feature that makes it much easier to safely secure your workpiece.
It also features an easy to use interface, and accessories included in the packaging.
Unfortunately, the results just aren’t there. The holes that this tool produces tend to be very jagged and unsightly. For the amateur, the results may be tolerable but there is no way that a pro would use this jig for very long.
10. Drill Master Portable Pocket Hole Jig Kit
This unit is really well built. The galvanized steel and the sturdy build quality account for a tool that will be around for a while.
Not so Good
This is an expensive jig that doesn’t deliver as well as something in its price range should. The holes tend to come out as jagged and unprofessional.
The Drill Master Portable Pocket Hole Jig Kit is a durable piece of equipment that is made to stand the test of time. The galvanized steel body will guarantee you are able to use this jig for many years to come.
It also is very versatile. The unit is designed to accommodate a wide variety of different settings, and the interface is such that most people won’t have any trouble getting started with it. However, there is a problem: value.
This is one of the most expensive tools on our list. While that may be forgivable in certain circumstances, the problem is made less forgivable by the fact that it doesn’t outperform many of the more affordable picks highlighted today. The holes it creates just aren’t as clean as I like to see.It’s a sturdy enough tool but it just doesn’t have enough of a professional look to justify its cost.
It is never easy choosing between ten really great products. That is why I have put together a few considerations that can be handy to keep in mind as you finalize your buying decision. Read on for some helpful tips!
The build material is what will determine how long you keep your jig. There are three common materials that we saw on the list today, plastic, aluminum, and steel. Each has its own pros and cons.
Plastic: Plastic tends to be very affordable. It is also lightweight and easy to transport. However, it is naturally very fragile and won’t hold up so well to the stresses of the modern job site.
Aluminum: Aluminum is lightweight, tougher than plastic, and almost entirely resistant to corrosive elements such as water. However, what it is regrettably lacking in the department of durability. Aluminum tends to get chipped up very easily which can lead to long term durability concerns.
Stainless Steel: Stainless steel is definitely the toughest material option. Assuming you get decent quality components, a stainless steel jig is going to last pretty much indefinitely. However, it does come with its own baggage.
Stainless steel jigs tend to be very heavy. They also cost more, and they will get rusty if they are exposed to water.
You can pay anywhere from $10-200 to get a good pocket hole jig. Generally speaking, it is in your best interest to spend at least a moderate amount of money on this purchase. Why?
The main reason is that cheaper jigs tend to suffer from shoddy materials. Most people would rather buy one $50 jig than five or six $10 jigs.
Depending on the jig you buy, you may be treated to a few accessories. For example, some of the units on our list featured drill bits, clamps, etc. Some even came with traveling cases that, while not necessary can help make the product much more user-friendly.
The more accessories that a jig has to offer, the more use you are likely to ultimately get out of it. Granted, accessory packages tend to cost more but the money is often well worth it—especially if you are starting from scratch.
Naturally, results are the most important element of any pocket hole jig. Does the jig you are interested in produce clean, accurate holes consistently? But for as important as this factor is it is also among the most challenging for the layperson to discover on their own.
Fortunately, guides like this one are really great at giving first-hand performance accounts. I test all of the products on this list personally. If some of them are sloppier in their work than others, I am always quick to mention it.
All pocket hole jigs are fairly compact. That said, some are bigger than others. If you are a pro with lots of equipment to take from place to place you may appreciate the opportunity to get something that is extra compact.
Do I need a pocket hole jig?
Yes! If you are a woodworker or hobbyist, a pocket hole jig is a necessary piece of equipment.
Can you drill pocket holes in plywood?
Yes. With a steady hand and the appropriate equipment it is possible to drill pocket holes in plywood.
How many pocket holes do I need?
The number of pocket holes that you require will ultimately depend on the unique needs of your job. Everyone is a little bit different so plan accordingly.
Did you find the right pocket hole jig for your needs? I know all too well how challenging it can be to find the right product. If you still haven’t managed to choose between the ten products on our list than there are a couple of quick recommendations that I can throw your way.
For example, if you want something that is uncompromisingly effective regardless of the price you may opt for my top choice, the Kreg K5 Pocket-Hole Jig.
Or maybe you want something that is a little bit more affordable. If that is your situation then consider something that combines quality and value. The Kreg Jig R3 Pocket Hole System is a good example of something that performs well at a great price.
But hey, my job isn’t to tell you what to do. My only goal is to help you find the perfect product for your needs. To that end, I hope I have been helpful.