15 Types Of Clamps That You Need For Woodworking

DISCLAIMER: THERE ARE AFFILIATE LINKS IN THIS POST. THIS MEANS THAT AT NO COST TO YOU, WE WILL RECEIVE A SMALL COMMISSION IF YOU PURCHASE THROUGH OUR LINK. YOU MAY READ FULL DISCLOSURE POLICY FOR MORE INFORMATION.

Types Of Clamps

If you are a crafts or handyman, chances are very high you must have come across clamps and made use of them severally in your day to day tool activities.

For newbies, clamps are a very vital and versatile part in any tool –with a clamp, you can effectively tighten your work piece to a work surface. Who could ever have thought that it would be very difficult holding two pieces together? Thanks to clamps that are always available to save the day and help you fasten things together.


Woodworkers find clamp as a very useful piece in their jobs –when working on materials as a woodworker, you will definitely require the use of a clamp to tighten your workpiece to your work surface.

 Working on materials without a clamp can be a very difficult and tiring task as the work piece is not held firm to the work surface. 

There are different types of clamps to ensure your work piece has a straight edge while sawing or carrying any other activity on the work surface.


15 types of clamps you will find very useful as a woodworker


The market is filled with a countless number of clamps which makes the selection process a bit of hard one. Below are 15 types of clamps used in woodworking.


  1. C-clamps

The C-clamp, as the name implies is shaped in a C curve –a long screw passes from the end of the C-clamp to the other. The C-clamp is sometimes referred to as the G-clamp.

Ideal for

  • Woodworking
  • Metal workpiece
  • Welding
  • Holding edge pieces

Special benefits

The C-clamp can be used for a variety of materials which makes it a preferred choice by some woodworkers. It has the three-way edging clamp and the single edging clamp. The clamp can hold materials proportional to its size so you may need more than one. 



  2. Pipe Clamp fixture

The pipe clamp fixture is somewhat similar to the sash clamp. It makes use of a round shaft instead of the flat bar. This tool does a good job of providing adequate pressure considering the size. Large materials can be effectively held firmly with the pipe clamp fixture.

Ideal for

  • Holding large items
  • Woodworking
  • Speed
  • Very good when much pressure is required.

Special benefits

Some of them have multiple-disk clutches, and this feature makes for easy connection to almost any part of the pipe. In other to allow for easy connection, you can make use of couplings to connect different pipe lengths.

  3. Deep throat bar clamp

These clamps are a combination of power and the pipe clamps along with the deep reach of a C-clamp. This clamp is sure to carry out some clamps works for you. The deep throat clamp can easily replace the pipe clamp fixture in most applications.

Ideal for

  • Woodworking
  • Power
  • Speed
  • Firm grips with good pressure.

Special benefits

It can effectively carry out a wide range of clamping activities as a result of the dual strength of C-clamps and pipe clamps. You can be assured that it will effectively hold your workpiece in place without slipping off.

  4. Handscrew Clamp

If you are one for DIY, then you may not need a handscrew clamps –as a professional, you definitely would need this. It has been used for woodworking for so long. It is made up of wood and metal with strong jaws.

Ideal for

  • Woodworking
  • clamping with good pressure
  • Adjustable jaws
  • Power

Special benefits

It provides ample clamping capacity through its wide length. Having this tool helps woodworkers handle a wide variety of jobs that are delicate and require good amount of pressure.

  5. One-handed bar clamp

The one-handed bar clamp has a spectacular advantage over other clamps as it does not require more than one hand to get it fixated to its position while the other hand for fastening as required by many clamps.

 The one-handed feature doesn’t make it weak but rather can produce good amount of pressure.

Ideal for

  • Woodworking
  • Metal work
  • One handed
  • Pressure

Special benefits

If you are working on multiple or difficult projects, then this clamp is an ideal clamp for you. It would help you effectively carry out some tasks.

  6. Spring Clamps

These clamps are called often by some people the pinch clamps. The spring clamps work similarly to the pins used on clothes and also look the same way. 

This clamp works just fine on hardwood due to the amount of pressure it exerts. They work effectively during repairs as an extra hand.

Ideal for

  • Woodworking
  • Increased pressure for clamping
  • Making small repairs

Special benefits

If you need lots of pressure when working on hardwood, then the spring clamp got you covered. The ergonomic design on some gives it a better grip. They apply similar force with larger C-clamps without sticking out.

  7. Ratchet action bar clamps

This clamp is known by some people as the band clamp. The ratchet action bar clamps are one of the clamps for woodworking on the market –this is peculiar to holding of odd shapes.

The ratcheting mechanism is very effective in holding materials as it remains in the desired position until it is being released.

Ideal for

  • Woodworking
  • Holding odd shaped materials
  • Holding materials firmly without causing any damage

Special benefits

This band clamp can effectively hold both soft and hardwood. It has a wide range of band length to fit a variety of materials. The ability to hold oddly shaped materials makes it a win-win for most people.

  8. Miter clamps

If you are considering holding together two pieces and you want them at a precise position, the miter clamp will come in really handy.

As a woodworker, you wouldn’t require more than one of these, unlike the C-clamp. It works as a very good substitute for the pinch clamp.

Ideal for

  • Woodworking
  • Holding wood sheets and edges
  • Assembling
  • Power

Special benefits

The miter clamp is quite easy to use –all you need to do is slide in your material and tighten the screw. It works well for the assembling of materials like frames and several moldings.

  9. Kant twist clamp

The Kant twist clamp is a favorite option for many. It is commonly used by woodworkers, metal workers, and welders.

The strategic positioning of the handle makes it easy to evade twisting while tightening the material.

Ideal for

  • Woodworking
  • Welding
  • Metal workers

Special benefits

You can always count on this the Kant twist clamp to effectively hold your materials through the perpendicular handle positioning. Woodworkers find it as a good clamp to hold quite a number of their work pieces.



  10. Locking clamp

The locking clamp is also another very good clamp seen on the market. It works similar to the sheet metal clamps. It differs from the sheet metal clamp in the fact that the jaws have a large surface area which makes it ideal for clamping materials.

Ideal for

  • Woodworking
  • Very fast
  • One handed
  • Metal working
  • Welding

Special benefits

It is one of the most popular for its efficiency in clamping materials. The one-handed design of this clamp makes them suitable for a number of things.

  11. Quick action clamp

The quick action clamp is another very popular clamp in recent times. As the name implies, it carries our swift action clamping. These clamps are similar to the F-clamps as a result of the varying clamp capacity.

Ideal for

  • Woodworking
  • One handed
  • Speed
  • Adjusting clamp capacity

Special benefits

The quick action clamp is very popular for its uses in woodworking and other clamping abilities. It does a very good job when you need to change clamp capacity. It can be tightened easily from the comfort of one hand.

  12. Edge clamp

Do you want to hold work pieces to an edge? The edge clamp is there to help out. The edge clamp effectively controls its two positions in two axis through its three separate screws. If you want to hold a butt weld or glue an assembly, then your edge clamp is sure to do justice.

Ideal for

  • Woodworking
  • Welding
  • Assemblies

Special benefits

The edge clamp does a good job in holding work pieces to the edge through its dynamic design.



  13. Parallel clamps

The parallel clamp is another clamp that is loved by people due to its clamping abilities. If you are looking for a clamp with large opening capacity, the parallel clamp is sure to suffice. They are similar to the F-clamp due to its opening capacity.

Ideal for

  • Woodworking
  • Large opening capacity
  • Large distribution area

Special benefits

The parallel clamps have a number of benefits. The large opening capacity makes it suitable for a number of clamping activities. During woodworking, the clamp jaws remain parallel when load is increased which gives it a large distribution area.

  14. Bench Clamps

The bench clamp is ideal for holding down or screwing down work pieces to the work surface. If you are working with a work table, then the bench clamp will come in handy. It can also be used for assemblies.

Ideal for

  • Woodworking
  • Assemblies
  • Welding

Special benefits

The bench clamp is your ideal clamp for fastening objects to your work surface. Woodworkers will find this clamp is a good one for some woodworking activities. It can also be used in welding.

  15. Spring clamps

If you are looking for an affordable yet effective clamp, then the spring clamp would be a perfect option for you. Their opening capacity is not as big as some other clamps but also can carry out a number of tasks.

Ideal for

  • Woodworking
  • Speed
  • Very affordable

Special benefits

This tool is very effective in halting or stopping movements while working. The clamp load is little owing to its size. It will help you carry out your clamping work with speed and little effort needed.

Conclusion

The above list consist of 15 types of clamps all offering different clamp activities. No single clamp can work in all situations and all materials. The C-clamp and Deep throat clamp carry out similar activities through its deep reach ability.

If you are looking for a clamp due to its varying clamping capacity then you can get the F-clamp or the quick action camp.

If you are on a low cost object and your clamping need requires little clamp load then you can patronize the spring clamp –it is very affordable.

Whatever your need is, make sure you look for one that carry out a number of clamping activities you desire before you buy it. Whether you are out for varying clamp capacity, large clamping capacity or whatever your need might be –there are a number of clamps to suit your needs.

Leave a Reply